1� Storage
The paper cutter blade should be stored in a
cool and dry place in china printing
company factory. To prevent the blade from rusting, a thin layer of oil can
be brushed on and near the blade with nylon brush. When storing, it is better
to use the box provided by the cutter supplier to ensure that the blade does
not contact with any part or article in the box. The blade of the paper cutter
can be wrapped up with foam plastics. The supporting blocks in the box must be
supported on the short axis at both ends of the cutter blade, but not supported
on the blade.
2� Transportation
When packing and transporting, it is necessary
to use the right size and strong boxes. Each box contains only one cutter
blade, and the surface of the cutter blade is wrapped with foam plastic. The
short shafts at both ends of the cutter blade shall be covered with wooden
blocks with holes respectively, and the wooden blocks shall be fixed in the box
to prevent the die cutter from shifting in the box during transportation. The outside
of the box shall be tightly wrapped with packing belt. The surface of the box
shall be marked with the words "vulnerable parts" to attract
attention.
3� Hoisting
and handling
When lifting and transporting in the workshop
in china printing company.
It should be covered with the blade surface of
the paper cutter with cloth to prevent damaging the blade. When installing
other parts, prevent the parts from loosening and falling on the cutter blade,
otherwise it will cause serious damage to the cutter blade.
4� Use
and maintenance
When using the cutter blade, it is necessary to
stick to the rolling shoulder to wipe the felt, and drip a proper amount of
lubricating oil every day to keep the cutter blade clean, and form a thin oil
film between the two to improve the wear resistance of the cutter blade
surface.
5� Make
records
To develop a good habit of making records in factory of china printing company, including the number of cuts, the date
when the blade of the paper cutter is returned for grinding, and the condition
of the paper cut during each work. By referring to these records, we can know
when we need to grind the cutter blades in the future production, when we need
to order new cutter blades, so as to avoid production delay or waste
