Printing and binding of four kinds of classification.
1, saddle stitching
A method of bookbinding, actions such as mounted on horseback.Thin book (under 6 post) sets, across on the hob, pressure iron wire nails to wear.
Saddle stitching usually refers to "flat wire nails, and use of not making good staple in advance, in the process of production machines from rolled into a roll of wire cut a section, nailed it into the paper, and on the other side of the paper will bend the wire fixation.
This way of stitching process characteristics, the books and periodicals text part synthesis ShuXin don't order in advance, but the cover on the match after the whole books ordered, trimming together.Horses binding of books and periodicals, the face of the cover seal, bottom seal part also with sheets of paper of the same size and neat ShuXin, whereas the spine is narrow and the circular arc form, and clearly show the wire used to order books, so can't print.
Riding binding binding cycle short, cost low, but the binding fastness is poorer, and the use of the wire is difficult to penetrate thick sheet.So, the page more than 50 pages (100) of books and periodicals, inappropriate use saddle stitching.From: www.chinaprintingmasters.com
